At Propeller Designs, we treat every timber product with a premium European hard wax oil finish, bringing out the rich, natural grain while providing a smooth, durable surface. This high-quality finish not only enhances the wood’s character, it also ages beautifully and offers long-lasting protection, ensuring your custom pedalboard or SSL console surround remains as stunning as it is resilient for years to come.
All our timber products are coloured using premium timber stains before receiving their hard wax oil coating. We use both hard wax oil stains that reveal more of the natural timber grain, and colour and penetrating stains that provide a richer, deeper colour.
Note that being timber, there may be knots, differing grain patterns and end grain colour differences due to the properties of the materials and stains used.
Our range:
We stock a range of acrylic pickguard colours to provide the accents on our timber products. Any combination of colour and pickguard can be used to tailor your pedalboard to your requirements. Additional colours are available on request.
Our range:
External:
- 490mm wide x 375mm deep x 138mm high
Internal:
- Lower deck overall: 450mm wide, 340mm deep
- Lower deck back: 450mm wide, 190mm deep, 80/72mm high
- Lower deck front: 450mm wide, 150mm deep
- Upper deck: 444mm wide x 184mm deep
External:
- 640mm wide x 375mm deep x 138mm high
Internal:
- Lower deck overall: 600mm wide, 340mm deep
- Lower deck back: 600mm wide, 190mm deep, 80/72mm high
- Lower deck front: 600mm wide, 150mm deep
- Upper deck: 594mm wide x 184mm deep
External:
- 790mm wide x 375mm deep x 138mm high
Internal:
- Lower deck overall: 750mm wide, 340mm deep
- Lower deck back: 750mm wide, 190mm deep, 80/72mm high
- Lower deck front: 750mm wide, 150mm deep
- Upper deck: 744mm wide x 184mm deep
Sized to fit the SSL UF1 with 1mm of extra width clearance internally.
External dimensions:
- Baltic birch ply - 242mm wide, 405mm deep, 137mm high
- Tasmanian oak - 244mm wide, 405mm deep, 137mm high
Sized to fit the SSL UC1 with 1mm of extra width clearance internally.
External dimensions:
- Baltic birch ply - 337mm wide, 405mm deep, 137mm high
- Tasmanian oak - 339mm wide, 405mm deep, 137mm high
Sized to fit the SSL UF1 with 1mm of extra width clearance internally.
External dimensions:
- Baltic birch ply - 468mm wide, 405mm deep, 137mm high
- Tasmanian oak - 470mm wide, 405mm deep, 137mm high
Sized to fit the SSL UC1 and UF1 as a dual unit integrated setup with 1mm of extra width clearance internally.
External dimensions:
- Baltic birch ply - 542mm wide, 405mm deep, 137mm high
- Tasmanian oak - 544mm wide, 405mm deep, 137mm high
Sized to fit the SSL UC1, UF1 and UF8 as a triple unit integrated setup with 1mm of extra clearance internally.
External dimensions:
- Baltic birch ply - 973mm wide, 405mm deep, 137mm high
- Tasmanian oak - 975mm wide, 405mm deep, 137mm high
A range of accessories and merchandise to continue your Propeller Designs experience.
A matching side platform for your expression and wah pedals and external effects. Sits 12mm off the ground on 25mm round rubber feet allowing cables to run underneath. Choose from 2 pedal or 3 pedal sizes:
- 2 pedal size: 260mm wide x 280mm deep
- 3 pedal size: 400mm wide x 280mm deep
Retro inspired pedal racks for storage or display of your extra pedals (because we all have extras!). Can also be used as a desktop pedal rack by wiring up pedals in place. Finished in any of our pedalboard colours and available in 2 styles and 2 sizes, all with 3 tiers of shelving:
- Small - 4 'standard pedal' width, holding a total of 12 standard pedals
- Large - 6 'standard pedal' width, holding a total of 18 standard pedals
- T Type - trapezoidal shaped ends
- O Type - oval shaped ends
Made in Australia and designed for strength and durability, padded to protect your pedal board from knocks while travelling. Available in three sizes to match your pedal board.
Made in Australia by a highly regarded road case manufacturer (GigGear Australia) - custom designed for our pedal boards. Fully lined with premium PE high density foam and waved egg-crate foam for maximum protection. Available in three sizes to match your pedal board.
Premium quality AS Colour 'Staple' t-shirts - ribbed crew neck, shoulder tape, side seams, 100% combed cotton, double stitched hems, 180gsm medium weight. Small logo on the front and large logo on the back. Available in black, charcoal and navy blue and in sizes M, L and XL.
While we generally make to order, we try to keep a few pedalboards, pedal platforms and pedal racks in-stock at any time.
PPB450 in Smoke Black with White Pearl ($100 off - minor blemish)
PPB600 in Shadow Brown with White Pearl
PPB600 in Midnight Black with Classic Tortoiseshell
PPB750 in Vintage Brown with Classic Mint Green
PPB600 in Smoke Black with Red Tortoiseshell - SOLD
PPB450 in Midnight Black with Classic Tortoiseshell - SOLD
PPB600 in Ghost Grey with Classic Ivory - SOLD
PPB600 in Midnight Black with Vintage White Pearl - SOLD
PPB600 in Storm Grey with Mint Green Pearl - SOLD
Prices are listed in Australian dollars (AUD).
Copyright ©Propeller Designs 2025 - All Rights Reserved.